Suzhou Kisinhom Machinery Co., Ltd.
Suzhou Kisinhom Machinery Co., Ltd.
What Are the Precautions for Using UV LED Curing Machine?

What Are the Precautions for Using UV LED Curing Machine?

In recent years, UV LED curing technology has received extensive attention in the electronics, medical, optical and other industries. The application of UV LED curing machine is also very extensive. UV LED is an electroluminescent diode. It is more environmentally friendly, efficient, and has low energy consumption compared with the traditional UV mercury lamp. It is a green industrial technology that can truly face sustainable development. Many manufacturers have also put UV LED curing machines into production and enjoy the high efficiency and convenience brought by UV LEDs. After purchasing a UV LED curing machine, what should be paid attention to when using it?

Ⅰ. Precautions of UV LED curing machine

1. Before starting the machine, check whether the body has good grounding protection.

2. When the UV LED curing machine is running, it is strictly forbidden to put your hand into the machine to avoid unnecessary work accidents. 

3. The skin or eyes should not be exposed to ultraviolet light for a long time to avoid being burned. 

4. In case of abnormal power failure in any part, the main power supply should be turned off, and the machine should be turned on after troubleshooting.

Ⅱ. Maintenance of UV LED curing machine

1. When using the UV LED curing machine, check the parts of the body in advance. If you find abnormal conditions, you should contact the maintenance personnel to repair. You have to wait to make sure that the device is normal before starting it.

2. Please clean the UV glue curing machine in time before and after use. When cleaning, remember not to rinse with water, especially for the UV LED light window and heat sink. If the glass of the light-emitting window is not cleaned for a long time, it will affect the penetration of UV LED light, resulting in incomplete curing of glue or ink. The heat dissipation port refers to the air outlet and air inlet, including the water-cooled UV LED curing machine. If the air inlet is not cleaned for a long time, it will be blocked by dust or foreign matter, resulting in poor heat dissipation. In the same way, the air outlet should not be blocked.

3. Regularly maintain various parts of the UV LED curing machine. Regularly measure the radiant light power of the UV LED curing machine every month or quarter to see if there is attenuation or loss, and deal with the broken UV LED lamp beads in time. The water-cooled UV LED curing machine needs to focus on checking whether there are many impurities in the internal circulating water. It is very necessary to replace the circulating water regularly.

UV LED curing machine has a wide range of applications. When using it, please pay attention to safety issues and protect yourself. Please also pay attention to the maintenance of the UV drying machine, because timely maintenance can ensure the good condition of the equipment, so as not to affect the service life and work efficiency.