UV LED curing machine has a wide range of applications, and there are also places where it is needed in the furniture manufacturing industry, such as UV varnish curing of solid wood furniture. With people's pursuit of quality of life, more attention has been paid to the exquisiteness of the appearance on the basis of improving the quality and shape of furniture products.
Wardrobes, a common type of furniture, are mostly made of solid wood. This solid wood wooden wardrobe has been finely polished to show different qualities. In order to make the wardrobe look more beautiful as a whole, the wooden boards used for assembling the wardrobe are usually varnished at the beginning of production. It is to spray the UV varnish on the wooden board, and then cure it through the ultraviolet radiation cold light source of the UV LED curing machine.
The glazing production process of the wardrobe is divided into glazing production before assembly and after assembly. The glazing process before assembly is to spray and cure each wooden board with UV varnish before the boards for assembling the wardrobe have not been assembled together, and then carry out the overall installation. This glazing method does not take up space due to the decomposition of wood blocks, which is much simpler than moving the entire wardrobe, so it can be produced in batches using an automatic assembly line.
The glazing production after assembly is to spray the whole with UV varnish and irradiate, cure the UV LED curing machine after the wooden boards of the wardrobe are assembled. Because the whole wardrobe is to be glazed and curied, both UV varnish spraying and UV curing of UV LED curing machine irradiation head need to have flexible and practical supporting facilities. The environmental factors should be considered when such furniture wardrobe glazing with UV LED curing machine irradiation curing UV varnish.
Wardrobe manufacturers will have many concerns about the technical aspects of UV LED curing machine irradiation and UV varnish on furniture wardrobe boards. Whether the equipment can be replaced with a matching UV LED curing machine is a frequently heard question from customers. Therefore, we will test the UV varnish used by the wardrobe manufacturers, and also customize the matching degree of the equipment that needs to be modified for light curing on the wardrobe. The irradiation head, water cooling system, power drive, and PLC program of the UV LED curing machine will be customized according to the needs of wardrobe glazing.